Jura milk system accessory set for those that have lost a milk breather, or a tube looks dirty. This kit gives you spare breathers, tubes and nipples to connect the tubes to all but the Giga range of Juras.
What?
It depends on if it is an HP1 or HP3:
HP1
Mainly the older machines and the E6 with the fine frother us this connection. In one kit you get the following:
- 4 x intake tubes,
- 2 x HP1 frother end nozzle replacment
- 2 x nipple connectors (they connect the pipe to the milk system).
- 2 x breathing nozzels
HP3
Most of the machines models since 2022 use this type of connection. In a kit you get the following:
- 4 x intake tubes,
- 2 x milk spout replacment
- 4 x nipple connectors (they connect the pipe to the milk system).
- 2 x breathing nozzels
If you use the milk system cleaner then normally the items above are far longer lasting. Add the milk system cleaner container for ease of use.
When?
If you find you fine frother is not frothing even after a clean then you may have an issue with the breathing tap. We have found that the milk system pipes sometimes discolour with use. Or as we have said if you have lost items
Reviews
There are no reviews yet.